Stainless Steel Insert Bearings SSA200 Series
Basic Info
Model No.: SSA200 Series
Product Description
Stainless Steel Insert Bearings SSA200 Series The eccentric locking collars are designed for use in applications where the shafts rotate in a single direction. They incorporate a matching eccentricity between the inner ring and locking collar.
Bearing Insert in Stainless Steel SSA200 Series.
Narrow Inner Race, Eccentric Locking, Light Duty
Narrow inner ring with spherical outer ring
Lubrication groove with oil hole on locking side
Anti-rotation pin on side opposite grease groove
Supplied with water/wash resistant Mobilgrease FM222 (FDA/USDA approved)
Standard seal: FDA approved Silicone Rubber Seal protected by stainless steel slinger
Operating Temperature Range -35C to +120C
Shaft diameter from 12mm to 60mm
Part No. | Bore dia | Dimension | Load rating | Weight | ||||||||||
D | Bi | Be | N | M | L | W | K | G | ds | C | Co | Kg | ||
SSA201 | 12(mm) | 40 | 19.1 | 12 | 6 | 13.1 | 28.6 | 28.6 | 13.5 | 5 | M6×0.75 | 7.84 | 3.58 | 0.12 |
SSA201-8 | 1/2(inch) | 40 | 19.1 | 12 | 6 | 13.1 | 28.6 | 28.6 | 13.5 | 5 | M6×0.75 | 7.84 | 3.58 | 0.14 |
SSA202 | 15(mm) | 40 | 19.1 | 12 | 6 | 13.1 | 28.6 | 28.6 | 13.5 | 5 | M6×0.75 | 7.84 | 3.58 | 0.11 |
SSA202-10 | 5/8(inch) | 40 | 19.1 | 12 | 6 | 13.1 | 28.6 | 28.6 | 13.5 | 5 | M6×0.75 | 7.84 | 3.58 | 0.13 |
SSA203 | 17(mm) | 40 | 19.1 | 12 | 6 | 13.1 | 28.6 | 28.6 | 13.5 | 5 | M6×0.75 | 7.84 | 3.58 | 0.1 |
SSA204 | 20(mm) | 47 | 21.5 | 14 | 7 | 14.5 | 31 | 33.3 | 13.5 | 5 | M6×0.75 | 10.37 | 5.04 | 0.15 |
SSA204-12 | 3/4(inch) | 47 | 21.5 | 14 | 7 | 14.5 | 31 | 33.3 | 13.5 | 5 | M6×0.75 | 10.37 | 5.04 | 0.16 |
SSA205 | 25(mm) | 52 | 21.5 | 15 | 7.5 | 14 | 31 | 38.1 | 13.5 | 5 | M6×0.75 | 11.31 | 5.97 | 0.18 |
SSA205-14 | 7/8(inch) | 52 | 21.5 | 15 | 7.5 | 14 | 31 | 38.1 | 13.5 | 5 | M6×0.75 | 11.31 | 5.97 | 0.21 |
SSA205-16 | 1(inch) | 52 | 21.5 | 15 | 7.5 | 14 | 31 | 38.1 | 13.5 | 5 | M6×0.75 | 11.31 | 5.97 | 0.18 |
SSA206 | 30(mm) | 62 | 23.8 | 16 | 8 | 15.8 | 35.7 | 44.5 | 15.9 | 6 | M8×1 | 15.73 | 8.64 | 0.3 |
SSA206-18 | 1-1/8(inch) | 62 | 23.8 | 16 | 8 | 15.8 | 35.7 | 44.5 | 15.9 | 6 | M8×1 | 15.73 | 8.64 | 0.32 |
SSA206-20 | 1-1/4(inch) | 62 | 23.8 | 16 | 8 | 15.8 | 35.7 | 44.5 | 15.9 | 6 | M8×1 | 15.73 | 8.64 | 0.29 |
SSA207 | 35(mm) | 72 | 25.4 | 17 | 8.5 | 16.9 | 38.9 | 55.6 | 17.5 | 6.5 | M8×1 | 20.83 | 11.68 | 0.5 |
SSA207-20 | 1-1/4(inch) | 72 | 25.4 | 17 | 8.5 | 16.9 | 38.9 | 55.6 | 17.5 | 6.5 | M8×1 | 20.83 | 11.68 | 0.55 |
SSA207-22 | 1-3/8(inch) | 72 | 25.4 | 17 | 8.5 | 16.9 | 38.9 | 55.6 | 17.5 | 6.5 | M8×1 | 20.83 | 11.68 | 0.5 |
SSA208 | 40(mm) | 80 | 30.2 | 18 | 9 | 21.2 | 43.7 | 60.3 | 18.3 | 6.5 | M8×1 | 23.55 | 13.6 | 0.63 |
SSA208-24 | 1-1/2(inch) | 80 | 30.2 | 18 | 9 | 21.2 | 43.7 | 60.3 | 18.3 | 6.5 | M8×1 | 23.55 | 13.6 | 0.67 |
Product Categories : Mounted Units And Inserts > Spherical Insert Ball Bearings